Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Before
After
Before
After
Before
AfterMetal Roof Installation Done Carefully, Across the United States
Metal roof installation is a long-term decision, and a good one when it is done right. A properly installed metal roof can last 40 to 70 years, shrugs off snow, rain and wind, and cuts down on the repairs that asphalt roofs demand every few seasons. At Birchbark Roofing we give you a written, line-item quote before any work begins, so you know what the panels, underlayment, trim and labor cost before we set a ladder against your house. We have been installing roofs since 2000, and we handle metal roof installation for homeowners nationwide. If you are ready to talk, call (424) 766-4937 for a free estimate.
A metal roof is only as good as the crew that puts it on. The panels can be perfect and the roof will still leak if the fasteners are wrong, the underlayment is rushed or the flashing is an afterthought. We arrive with shoe covers at the door, protect your landscaping and leave the yard as we found it. Our technicians are background-checked and uniformed, so you always know who is on your property. We are part of the Cedarwell family of independently owned roofing businesses, and every install is backed by our 365-Day Done Right Promise. If the work is not done right, we make it right.
What Our Metal Roof Installation Service Includes
A full metal roof installation is more than laying panels. Each step below affects how long the roof lasts and how quietly it sheds weather, so we do all of them the same way on every house.
Roof Deck Inspection
Before any metal goes down we check the deck for soft spots, rot and old nail pops. Replacing a few bad sheets of plywood now costs far less than finding them after the new roof is on. We show you what we find and put the cost in writing before we proceed.
Underlayment and Ice Protection
Metal panels are the visible layer, but the underlayment is what keeps water out if wind pushes rain under a seam. We use a high-temperature synthetic or self-adhering membrane, and we add ice and water shield along eaves, valleys and penetrations where leaks start.
Panel Layout and Fastening
Metal expands and contracts with temperature, so panels have to be laid square and fastened to allow for that movement. Bad layout shows up later as oil canning, popped screws and gaps at the ridge. We chalk our lines, check them against your roof’s geometry and fasten to the manufacturer’s spec.
Flashing, Trim and Closures
Chimneys, skylights, vent pipes and wall intersections are where roofs fail. We fabricate or fit metal flashing for each one, add foam or rubber closures under the ridge and eaves, and seal every joint so wind-driven rain and pests cannot get in.
Snow Guards and Gutters
Snow slides off metal faster than it does off shingles, which can be dangerous over doorways and walkways. In snow country we install snow guards where they are needed and make sure your gutters can handle the sudden load.
Cleanup and Final Walkthrough
Metal offcuts are sharp and magnets are the only reliable way to find stray screws. We sweep the whole property with a magnetic roller, haul away the old roofing and walk the finished roof with you before we call the job done.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Types of Metal Roofing We Install
Not every metal roof is the same, and the right choice depends on your house, your climate and your budget. We walk you through the options in plain terms and tell you which one we would put on our own home.
Standing seam. Wide panels with raised seams and hidden fasteners. This is the premium option: clean lines, the fewest places for water to enter and the longest service life. It costs more up front and is worth it on low-slope or high-exposure roofs.
Exposed-fastener ribbed panels. Corrugated or ribbed panels screwed down through the face with gasketed screws. They cost less and install quickly, but the gaskets wear out and the screws need re-tightening over the years. A good fit for garages, sheds and budget-conscious projects.
Metal shingles and tiles. Stamped steel or aluminum pieces that mimic slate, shake or clay tile. They suit neighborhoods with style rules and homeowners who want the look of another material without the weight.
Steel, aluminum or copper. Coated steel is the common workhorse. Aluminum resists salt air better, which matters near the coast. Copper and zinc are specialty metals that develop a patina and last the longest.
Why Homeowners Choose Metal Over Shingles
The reasons come up again and again in our estimates. Metal sheds snow and heavy rain quickly, handles high winds when it is installed correctly and does not crack, curl or lose granules in the sun. Many panels carry a Class A fire rating, which matters in wildfire country. Reflective coatings can lower cooling costs in hot climates, and a metal roof is typically recyclable at the end of its life. Insurance carriers in some regions offer discounts for impact-resistant or fire-rated roofs, so ask your agent before you decide.
It is not the right choice for everyone. If you plan to sell within a couple of years, the higher cost may not come back to you. We will say so honestly. If you want to compare against a conventional replacement, see our roof installation page for the full range of options.
Signs It Is Time to Replace Your Roof With Metal
- Shingles Curling or Losing Granules: Bald spots, curled edges and sand-like granules in your gutters mean the shingles have reached the end of their life. Another round of repairs usually costs more than a new roof over time.
- Repeated Leaks in the Same Area: If patches keep failing around the same chimney, valley or vent, the roof system itself is tired. A new installation with proper flashing solves the cause, not the stain.
- Storm Damage: Hail dents, wind-lifted shingles and fallen branches can leave a roof compromised even when it looks fine from the ground. Our storm damage roof repair team can tell you whether a repair will hold or a full replacement makes more sense.
- High Energy Bills: A dark, aging roof soaks up heat. If your attic is baking and the air conditioning never catches up, a reflective metal roof with good ventilation can help.
- Your Roof Is 20 Years Old or More: Most asphalt roofs are near the end by then. Not sure where yours stands? Book a roof inspection and we will give you an honest read.
Our Metal Roof Installation Process – Step by Step
1. Inspection and Consultation: We look at your roof and attic, measure the slopes and talk through what you want. We check the deck, the ventilation and the condition of existing flashing.
2. Written Quote: You receive a clear, written price in dollars before any work starts. It lists the panel type, gauge, color, trim and labor. No hidden fees and no surprise change orders.
3. Material Selection and Ordering: You pick the profile and color. Metal panels are usually cut to length for your roof, so we confirm every measurement twice before ordering.
4. Tear-Off and Deck Repair: We remove the old roofing, repair any damaged decking and protect your property with tarps and drop cloths while the roof is open.
5. Installation: Underlayment, flashing, panels and trim go on in order, with the roof dried in at the end of each working day so a surprise storm does not catch us open.
6. Cleanup and Walkthrough: We magnet-sweep the property, remove debris and review the finished roof with you. You get the warranty paperwork in hand before we leave.
How Much Does Metal Roof Installation Cost?
Metal roof installation costs more than asphalt shingles up front, and the range is wide because every roof is different. Most residential projects fall somewhere between $9,000 and $35,000, with simple low-slope roofs near the bottom and large, complex standing seam roofs near the top. The final number depends on roof size, pitch, panel type and gauge, the number of valleys and penetrations, and what shape the deck is in.
Because pricing is per job, we quote each roof individually. When we inspect your roof, we give you a written estimate that breaks out materials and labor. Once you approve it, the price does not move. We do not use high-pressure sales tactics; we give you the numbers and let you decide. Call (424) 766-4937 to schedule your free estimate and get a firm price for your home.
Materials and Brands We Work With
We install panels from established manufacturers and follow each manufacturer’s fastening, spacing and underlayment requirements, because a skipped step can void a material warranty. Finishes with a baked-on Kynar or similar paint system hold their color for decades. We steer you away from thin, bargain-grade panels that dent easily and fade early, and we explain the gauge differences so you can compare quotes on equal terms.
Metal roofs also need good ventilation to prevent condensation under the panels. We check intake and exhaust airflow on every job. If your attic needs more, we will add it as part of the install. You can learn more about our general approach on our home page, or see how we handle flat roof repair if part of your house has a low-slope section.
Metal Roof Installation Near You – Our Service Area
We serve homeowners across the United States through our network of independently owned local crews, each held to the same standards and the same written promise. Climate matters for metal roofing, from heavy snow loads in the north to salt air on the coast and high winds on the plains, so we match panel type, coating and fastening to where you live. A live person is available to answer your call 24 hours a day.
Frequently Asked Questions – Metal Roof Installation
Most homes take two to five working days once materials arrive. Larger or more complex roofs with many valleys and penetrations can take a week or more. We give you a realistic schedule during the estimate, and weather can shift it by a day or two.
Most residential metal roofs run between $9,000 and $35,000 depending on size, pitch, panel type and deck condition. We provide a written price in dollars before any work begins, so you are never surprised by the final bill. Call (424) 766-4937 for an exact quote, as estimates are always free.
Sometimes, depending on local code and the condition of the layer underneath. In most cases we recommend a full tear-off, because it lets us inspect the deck, fix rot and install proper underlayment. Covering over a failing roof can hide problems and trap moisture.
Not when they are installed over a solid deck with proper underlayment. The deck and attic insulation absorb most of the sound, and most homeowners find the noise about the same as any other roof. Open-framed structures like carports and barns are louder.
No. Metal does not attract lightning any more than other roofing does. If a strike happens, metal spreads the energy and does not burn, which makes it safer than materials that can catch fire.
Our 365-Day Done Right Promise means that if the work we perform is not done right, we make it right. This guarantee covers every roof installation and repair Birchbark Roofing performs for one full year. We stand behind our work because we believe in doing the job correctly the first time.
Schedule Your Metal Roof Installation Today
If your roof is aging, leaking or has taken a beating from the weather, do not wait for the damage to spread into your home. At Birchbark Roofing, we are ready to provide the careful, professional service your house deserves. We offer free, written estimates and a 365-Day Done Right Promise on all work. Call (424) 766-4937 to speak with a live person today and schedule your inspection.
Written by Erik Lindgren, Owner at Birchbark Roofing, installing roofs since 2000.