Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Before
After
Before
After
Before
AfterFast, Reliable Roofing Company Across Hollywood
Birchbark Roofing serves Hollywood, FL with roof repair, replacement, and inspection work built around one reality our crews deal with every week: salt air and HVHZ code. If your Hollywood roof is leaking or aging out, we’ll give you a written price before any work starts, and we’ll protect the inside of your house while we’re on it. Shoe covers at the door, drop cloths through the hallway, a photo of the cleaned-up driveway before the crew pulls away. That’s how a Roofing Company should operate in a city where the ocean is always in the air. Call (424) 766-4937 and a live person answers, day or night.
Why Birchbark Roofing Is Hollywood’s Preferred Roofing Company
We know the difference between a Hollywood roof that’s 6 blocks from the Broadwalk and one that’s 6 miles west near Stirling Road. The salt exposure isn’t the same, and neither should be the fastener spec. Our technicians are background-checked and uniformed, and we work with materials from GAF, Atlas, and Tamko that carry Miami-Dade Notice of Acceptance approvals, meaning they’ve actually passed HVHZ testing. No guesswork, no “this should be fine” product substitutions.
Families across Hollywood call us because we name what we’ll protect before anyone climbs a ladder. Pet-safe products where there’s a choice. Quiet-hour coordination if you’ve got a napping toddler. Our crews respect the fact that your kids play in the yard where our ladder goes up. Erik Lindgren leads the team, and every job carries the 365-Day Done Right Promise: if the work isn’t right, we make it right. That guarantee is stamped on every repair and replacement we do in Hollywood.
Metal Roof Installation in Hollywood
Metal Roof Installation in Hollywood takes on a different character than it does inland because every panel, clip, and fastener has to survive decades of salt-laden wind moving off the Atlantic with no significant inland buffer to slow it down. A standing-seam metal roof in Hollywood should be specified with stainless or hot-dip galvanized hardware from day one, not upgraded later. We see electroplated fasteners on metal roofs along A1A and in the older grid west of Dixie Highway pit and bleed rust within two or three seasons. Most metal roof installations in Hollywood run between $18,000 and $38,000 depending on roof size, tear-off scope, and whether the deck needs re-sheathing. You’ll see your exact number in writing before we start.
Coastal-Spec Hardware and Finishes
We specify stainless steel clips and hot-dip galvanized fasteners on every Hollywood metal roof. The painted steel drip edge and ridge vent that works fine in Plantation will underperform here within a few years. For panels themselves, we favor PVDF-coated (Kynar) finishes that stand up to salt spray far better than standard polyester coatings.
When a Full Replacement Makes Sense
If your Hollywood home is a mid-century CBS ranch with its original built-up gravel roof still underneath several layers of repairs, a metal roof can lighten the load and solve the re-cover problem permanently. Code requires full tear-off once stacked hot-mop layers are documented during permit inspection, so metal becomes a long-term answer instead of another patch.
Residential Roofing in Hollywood
Residential Roofing in Hollywood means working on a housing stock that was heavily built out between the 1950s and 1970s: single-story concrete block ranch homes, many with original low-slope or flat roofs now decades past their useful life. The beach corridor adds aging 1970s and 1980s condo buildings with large flat membrane roofs under heightened scrutiny after Florida’s post-Surfside structural integrity reserve legislation. Whether it’s a full replacement on a CBS ranch in the 33020 zip or membrane work on a condo near the Broadwalk, most Hollywood residential roof replacements run between $9,500 and $22,000. Written price before any work starts, always.
Repair vs. Replacement on Older CBS Homes
A 1962 ranch off Hollywood Boulevard often has two or three layers of hot-mop roofing stacked over the original gravel built-up system. Once a permit inspector documents that, Broward County code requires full tear-off, not a recover. We’ll tell you honestly which path applies to your roof before you spend a dollar.
Condo and Flat Roof Work
Flat membrane roofs on Hollywood’s beach corridor condos need HVHZ-compliant fastening patterns and materials with Miami-Dade NOA approval. We handle TPO, PVC, and modified bitumen systems, and we coordinate access carefully with building management so residents aren’t surprised by noise or debris.
Trusted Brands We Service in Hollywood
We work with materials from GAF, Atlas, Tamko, CertainTeed, Owens Corning, IKO, and Boral, and we only specify products that carry Miami-Dade NOA approval where Hollywood code demands it. Because we’re part of the Cedarwell family of independent local roofing businesses since 2000, we can get GAF and Atlas components staged quickly for Hollywood jobs without the lead-time delays that plague national chains. You get the brand warranty plus our 365-Day Done Right Promise on top of it.
Common Roofing Company Problems We See in Hollywood Homes
- Stacked hot-mop layers on 1950s-1970s CBS decks. Successive owners had hot tar applied over the original gravel built-up roof, adding load the deck was never engineered to carry. Hollywood’s older west-side grid neighborhoods are full of this, and Broward code requires full tear-off once it’s documented during the permit inspection.
- Inland-grade fasteners dying in salt air. Electroplated nails, painted steel drip edge, and standard ridge vents pit and bleed rust within a few seasons of onshore wind with no inland buffer. We specify hot-dip galvanized or stainless hardware on every job west of the Intracoastal.
- Products that aren’t on the Miami-Dade NOA list. A cheap bidder might bring a shingle or membrane approved for Palm Beach County, which stops at the county line roughly 20 miles north. Hollywood is entirely inside Florida’s High Velocity Hurricane Zone, so every product must carry a Miami-Dade Notice of Acceptance with the exact HVHZ uplift nailing pattern. If it doesn’t, the inspection fails and the whole assembly gets torn apart.
- Corroded flashing and ridge vents on beach-corridor condos. Large flat membrane roofs along the Broadwalk take constant salt spray, and metal components degrade faster than the membrane itself. We inspect flashing condition as part of every Hollywood roof evaluation.
Pricing for Roofing Company in Hollywood, FL
Here’s what we actually see in Hollywood: a standard architectural shingle replacement on a CBS ranch home runs $9,500 to $18,000, a flat or low-slope membrane job runs $12,000 to $22,000, and a metal roof installation runs $18,000 to $38,000. The coastal-spec version of any job runs 10% to 20% higher than the inland-spec version, because stainless and hot-dip hardware costs more than electroplated fasteners. The cheap spec looks like a savings until rust streaks show up on the stucco in three years, and then the tear-out costs more than the original job. Call (424) 766-4937 for your free estimate, and you’ll get a written dollar figure before we touch your roof.
We Also Serve Cities Near Hollywood
Our crews serve Hollywood and the surrounding South Florida area. You’ll find us running jobs in North Miami Beach, Fort Lauderdale, Miami Gardens, and Plantation as well. Same written pricing, same 365-Day Done Right Promise, same care for your floors and yard.
Serving Hollywood, FL - Our Local Coverage Area
We’re based in the Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roofing Company in Hollywood
Boynton Beach sits in Palm Beach County, just north of the line where Florida’s High Velocity Hurricane Zone stops. Hollywood is fully inside the HVHZ, so every shingle, membrane, fastener, and ridge vent installed here must carry a Miami-Dade Notice of Acceptance approval with the exact HVHZ uplift nailing pattern. A product approved for Boynton Beach without NOA listing was never tested for the wind-uplift forces we design for in Hollywood, and a permit inspection will flag it. Call (424) 766-4937 and we’ll confirm what’s approved for your specific roof before we quote it.
If there are multiple layers of hot-mop or built-up roofing stacked over the original gravel system, Broward County code requires a full tear-off once the permit inspection documents it. A recover is not permitted in that condition because the deck was never engineered to carry the accumulated weight. We tore off a 1962 CBS ranch off Hollywood Boulevard near the downtown grid where two prior hot-mop layers sat on the original gravel roof, and re-decked it in plywood set with hot-dip galvanized fasteners before laying the new system. Call (424) 766-4937 and we’ll inspect your roof honestly.
Expect painted steel drip edge, ridge vents, and electroplated fasteners to show visible rust and pitting in Hollywood within two to four seasons, versus five to eight seasons in Pembroke Pines or Plantation. There’s no inland buffer to slow the salt-laden onshore wind, so we specify stainless and hot-dip galvanized hardware on every job here. The price difference on hardware is modest, and it buys you roughly double the service life. Call (424) 766-4937 for a written quote with the correct coastal spec.
It means the fasteners holding your roof deck and covering down are placed closer together at the edges and corners than they would be inland, because wind uplift tries to peel the roof off starting at the perimeter. In Hollywood, every permitted job has to follow the Miami-Dade NOA product listing’s exact nailing schedule, not a generic Florida building code minimum. A roof nailed to the inland pattern can pass a casual look and fail an HVHZ inspection. Call (424) 766-4937 and we’ll show you the pattern for your product before we start.
Yes, typically 10% to 20% more on the hardware and finishes, which translates to a few hundred to a few thousand dollars depending on roof size. That buys stainless or hot-dip galvanized fasteners, NOA-matched flashing, and a ridge vent that won’t rust out in three seasons. The inland-spec version saves money upfront and then costs more than the original job when the rusted components have to be torn out and replaced within a decade. Call (424) 766-4937 for a line-item comparison so you can see the exact numbers.
If your Hollywood roof needs honest eyes on it, call (424) 766-4937. We’ll schedule a free estimate, give you a written price in dollars, and answer every question about salt air, HVHZ code, and what we’ll do to protect your home while we work.
Written by Erik Lindgren, Owner at Birchbark Roofing, serving Hollywood and surrounding South Florida communities.