Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Before
After
Before
After
Before
AfterFast, Reliable Roofing Company Across Sunrise
When a Sunrise roof starts leaking or shows its age after decades of Broward County sun and wind, you need a roofing company that understands exactly what the local code requires, not one that figures it out on your dime. Birchbark Roofing serves Sunrise homeowners with repair and replacement work that meets High Velocity Hurricane Zone standards from day one. We know the 1970s gable homes in Sunrise Golf Village, the flat-roof condos near Welleby, and the tile roofs that line Nob Hill Road. If you need a roofer who documents every fastener, underlayment, and inspection before the county asks, call (424) 766-4937 for a written estimate.
Why Birchbark Roofing Is Sunrise’s Preferred Roofing Company
Sunrise homeowners have a specific frustration with roofing contractors: the quote sounds fine until the permit gets rejected and the job stalls at the inspection stage. Our team works differently. We pre-check deck attachment, fastener schedules, and underlayment approvals for Broward County’s HVHZ before the first nail goes down. That means Roof Replacement in Sunrise on a 1970s ranch in Sunrise Golf Village or a tile job near Sawgrass Mills moves from tear-off to close-out without a re-inspection surprise.
Our Roofing Company team includes background-checked, uniformed technicians who protect the inside of your Sunrise home during the job. Shoe covers at the door. Drop cloths through the hallway. A photograph of the finished clean-up before the crew leaves. Erik Lindgren, who leads Birchbark Roofing, built the company’s C.A.R.E. standards around exactly those details: Clean up like it is our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, Explain the price before the work starts.
Metal Roof Installation in Sunrise
Metal Roof Installation in Sunrise carries a heavier engineering burden than in most Florida cities because every panel, clip, and fastener must carry a Broward County HVHZ product approval. That approval is not optional. A metal roof on a Sunrise home has to withstand wind loads that coastal codes in some other counties do not even test for. For Sunrise homeowners, that means a metal roof done right is quieter in afternoon storms, sheds Everglades-driven rainfall fast, and rarely needs replacement in the owner’s lifetime. You will pay between $18,000 and $42,000 on a typical Sunrise single-family home depending on panel gauge, profile, and deck condition. The written price before work starts includes the compliance documentation, not just the panels.
Stone-Coated Steel on Older Sunrise Homes
Many 1970s and 1980s Sunrise homes were built with concrete tile that is now reaching end-of-life together. Stone-coated steel panels can often go over the original framing without the weight penalty of new tile, which matters when the trusses were designed for lighter loading. The profile still has to meet HVHZ wind ratings, and the attachment points get verified by a Broward County inspector before close-out.
Standing Seam Where HOA Codes Apply
Several Sunrise communities have aesthetic requirements for roofing materials, especially visible ridgelines. Standing seam panels in neutral tones tend to pass architectural review while giving you the wind performance of a mechanically seamed system. We coordinate the product spec with your association before ordering materials so you are not stuck with an approved roof the HOA rejects.
Residential Roofing in Sunrise
Residential Roofing in Sunrise almost always means re-roofing a pre-1994 home that was built before post-Hurricane-Andrew codes went into effect. The original tile or shingle may have been legal when installed, but Broward County now requires a documented upgrade to current HVHZ standards any time the roof is replaced. That includes new nailing schedules, approved peel-and-stick underlayment, and verified deck attachment. On a typical Sunrise single-family home, you are looking at $11,000 to $24,000 for architectural shingles, and $16,000 to $38,000 for a tile or metal replacement. Your exact number arrives in writing before we start, and it includes the permit package, not a vague promise to handle inspections later.
Shingle Re-Roofs With HVHZ Documentation
A shingle replacement in Sunrise is not just swapping old for new. The county wants the deck attachment pattern verified, the underlayment to be an approved peel-and-stick or double-layer system, and the fasteners to be the correct ring-shank size and spacing. We build every Sunrise quote around those line items because a bid that omits them is a job that will stall.
Tile Roof Replacement for Sunrise’s Older Stock
Sunrise has thousands of homes with original flat concrete tile from the late 1960s through the 1980s. When that tile fails, it is usually because the underlayment beneath it dried out decades ago. A proper replacement means lifting the old tile, fixing rotted decking, installing a new HVHZ-rated underlayment, and resetting or replacing the tile to current attachment standards. Your 1980s tile roof cannot simply be patched over and called compliant.
Trusted Brands We Service in Sunrise
Birchbark Roofing works with materials from GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. For Sunrise jobs, we primarily recommend Atlas and GAF shingle lines because their HVHZ product approvals are current and their peel-and-stick underlayments pass Broward County review without exception. Boral tile is a strong match for Sunrise’s older concrete tile stock when the homeowner wants the original look with a modern attachment system. We stock the approved fasteners and underlayments our Sunrise crews need before the job starts, not after the inspector asks for them.
Common Roofing Problems We See in Sunrise Homes
- Undersized nail patterns on 1970s gable roofs. Broward County’s HVHZ code requires specific ring-shank nail counts and spacing that older installations never had. A roof that looks fine from the street may fail inspection the moment a re-roof permit is pulled because the existing deck attachment does not meet current standards.
- Rotted plywood decking from year-round humidity. Sunrise’s inland position traps humidity against the underside of aging roofs, and the afternoon storm cells that build over the Everglades drive water under shingles that have lost their seal. We find deck rot on nearly every pre-1994 home we strip, and it has to be replaced before new underlayment goes down.
- Failed flat-roof membranes on condo complexes. Sunrise has a large inventory of flat and low-slope roofs on condominium buildings from the 1970s and 1980s. The original built-up or modified bitumen membranes have surpassed their life expectancy and the HVAC units sitting on top of them complicate replacement.
- Tile that is delaminating from the underlayment. The original concrete tile on many Sunrise homes is actually fine, but the underlayment beneath it has dried out, cracked, or separated. The tile lifts, water gets under it, and the deck rots. Patching individual tiles does not fix the roof; the underlayment has to be replaced.
Pricing for Roofing Company in Sunrise, FL
Sunrise roofing prices run higher than neighboring Palm Beach County cities for one structural reason: HVHZ compliance. A shingle re-roof in Sunrise typically runs $11,000 to $24,000. Tile replacement runs $16,000 to $38,000. Metal runs $18,000 to $42,000. Roof repairs on a Sunrise home usually land between $450 and $2,200 depending on the damage. The variables that move the number are deck rot discovery, roof pitch, tile weight versus shingle weight, and whether the existing deck attachment needs to be brought up to current hammer-and-ring-shank standards. You will see every line item in writing before any work starts. Call (424) 766-4937 for your free Sunrise estimate.
We Also Serve Cities Near Sunrise
Our crews serve Roofing Company in Sunrise and the surrounding South Florida cities. If you are in Miami, Hialeah, Fort Lauderdale, or Pembroke Pines, we can bring the same HVHZ-compliant approach and the same written-price guarantee to your address. Scheduling is coordinated from our Miami-area office, and the same background-checked technicians handle your job from start to finish.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roofing Company in Sunrise
Sunrise sits entirely inside Broward County’s High Velocity Hurricane Zone, which means every roof replacement has to meet HVHZ product approvals, nailing schedules, and inspection standards. Coral Springs and Boca Raton are in Palm Beach County, where those requirements are less stringent. The extra cost in Sunrise goes into the correct fasteners, approved underlayment, verified deck attachment, and the documentation package the county demands. Call (424) 766-4937 and we will show you exactly where each dollar goes in writing.
A square is 100 square feet of roof area, and it is the unit every Sunrise roofing quote should be built around. Your total price is the cost per square for tear-off, materials, underlayment, and fasteners multiplied by your roof’s square count, plus any decking replacement. If a Sunrise quote does not show squares, you cannot compare it apples-to-apples against another bid. We itemize every square on your written estimate.
Yes. A properly installed shingle roof on a Sunrise home can meet the 130 mph wind load required by Broward County’s HVHZ code when the shingles are paired with the approved peel-and-stick underlayment, the correct ring-shank nail pattern, and a sealed deck. The rating comes from the complete system, not the shingle alone. The compliance documentation we provide is what your insurance carrier wants to see.
Almost everything beneath the tile has to change. The original underlayment from the 1980s is not HVHZ-approved, the deck attachment was likely nailed to older standards, and the tile itself may not carry a current product approval number. A compliant replacement means verified deck attachment, new HVHZ-rated peel-and-stick underlayment, and tile that meets current wind-load standards. You cannot legally reuse the original nailing patterns or underlayment on a Sunrise re-roof.
Your insurance carrier can use the wind mitigation and HVHZ compliance documents from your roof replacement to confirm your home meets the current wind-resistance standards, which is often a factor in premium reviews. In Sunrise’s insurance market, a documented compliance package proves the roof was installed to code, not merely claimed to be. We hand you that documentation at the end of every Sunrise job.
Call Birchbark Roofing in Sunrise Today
If you live in Sunrise and your roof is reaching the end of its life, do not settle for a contractor who quotes you a price and figures out the HVHZ compliance later. That is how job-site holds happen. Birchbark Roofing gives you a written price in dollars before any work starts, uses approved materials that pass Broward County review, and documents every step of the compliance trail. A live person answers our phones around the clock at (424) 766-4937. Call now for your free estimate, and we will walk you through exactly what your Sunrise roof needs to pass inspection the first time.
Written by Erik Lindgren, Owner at Birchbark Roofing, serving Sunrise with HVHZ-compliant roofing since the Cedarwell family of companies was founded in 2000.