Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Repair Across Pompano Beach
Roof repair in Pompano Beach is not the same job it is in Coral Springs or Coconut Creek, and the difference comes down to wind. Pompano Beach sits inside Broward County’s High-Velocity Hurricane Zone (HVHZ), one of only two counties in the country where every roofing product must carry a current Miami-Dade Notice of Acceptance before it can legally go on a roof. That single requirement changes what gets installed, how it gets fastened, what the permit inspector checks, and what your insurer will accept after a claim. We know because we work under it every week. If you need a repair on a Pompano Beach roof, call (424) 766-4937 for a written price before any work starts.
Why Birchbark Roofing Is Pompano Beach’s Preferred Roof Repair Company
What homeowners in Pompano Beach tell us they want is simple: a crew that shows up knowing the local code, and treats the house like a home while they’re on it. Our technicians are background-checked and uniformed, so you know exactly who is walking through your door and onto your roof. Shoe covers go on at the entry, drop cloths run through the hallway to the roof access, and the clean-up is photographed before the crew leaves. That photo comes to you, not just to our file.
We have worked on more 1950s and 1960s CBS ranch homes across Pompano Beach than we can count, including jobs near Pompano Beach Highlands, Cresthaven, and the neighborhoods east of Federal Highway. That local experience matters when a flat built-up roof from 1962 needs a repair that current HVHZ code will not let us simply patch. Erik Lindgren, who leads Birchbark Roofing, makes sure every quote spells out what the code requires and what it costs in writing, before anyone climbs a ladder.
Every repair carries the 365-Day Done Right Promise. If the work is not right, we make it right. That is stamped on every job we do in Pompano Beach.
Commercial Roof Repair in Pompano Beach
Commercial Roof Repair in Pompano Beach means flat and low-slope built-up roofs, modified bitumen, TPO, and the occasional metal edge detail, all sitting under the same HVHZ rules that govern residential work. A commercial roof that loses a section to wind or water is not just an inconvenience; if the failed section crosses the 25% re-roof threshold within 12 months, Broward County requires the entire roof assembly to be brought into full compliance. On a Pompano Beach commercial property east of Federal Highway, that usually means stainless or hot-dipped galvanized fasteners and flashing, because salt-laden onshore air eats standard galvanized hardware within a couple of seasons.
Flat Roof Repairs and Re-Covers
Flat commercial roofs in Pompano Beach fail most often at seams, drains, and penetrations. We inspect the existing membrane, identify the failed area, and write the repair scope so it meets the NOA requirements the permit office will enforce. You get a price in writing, and the job is done to code, not just done.
Wind-Edge and Fastener Upgrades
Many commercial roof failures we see along the Intracoastal corridor start at the perimeter. We repair the edge detail and upgrade the fastening where the code requires it, using corrosion-resistant hardware so the repair is not leaking again in two years.
Roof Leak Repair in Pompano Beach
Roof Leak Repair in Pompano Beach usually starts with a homeowner noticing a water stain on the ceiling after a storm, or a soft spot near a vent or skylight. In Pompano Beach’s older housing stock, the culprit is often aged flashing, failed mastic, or a built-up flat roof section that has finally given way. Most leak repairs on a single-family home in Pompano Beach run between $350 and $900 when the leak is localized and the decking is still sound. A leak that has been running for months and shows rotten plywood under the roofing will push higher. You will see the exact number, itemized, before we begin.
Vent Boots, Valleys, and Flashing Repairs
Vent boots crack from UV and age. Valleys collect debris and water. Flashing lets go at the seams. We replace vent boots, re-bed flashing, and repair valley channels using NOA-approved materials, and we use stainless hardware where corrosion matters most.
Post-Storm Leak Checks
After a named storm, leaks can hide for weeks. We inspect the roof for lifted shingles, broken tiles, and compromised flashing. The inspection is straightforward: we document what we find, write the repair scope, and give you a price in writing.
Trusted Brands We Service in Pompano Beach
We work with materials from GAF, Atlas, Tamko, Boral, CertainTeed, Owens Corning, IKO, and others, and for Pompano Beach homes we make sure every product line we touch has a current Miami-Dade NOA. That matters because a roof spec that passes code in Palm Beach County does not necessarily pass in Broward. We keep common repair materials in steady supply for Pompano Beach jobs so a simple leak repair does not wait on a special order. If a specific brand or color is important to you, tell us, and we will match it where the NOA listing allows.
Common Roof Repair Problems We See in Pompano Beach Homes
- Salt-driven flashing corrosion east of Federal Highway. Standard galvanized flashing and fasteners fail fast in the salt air along the Intracoastal. We use stainless or hot-dipped galvanized hardware as standard practice, not as an upsell.
- Non-NOA materials from out-of-county crews. We regularly repair or redo work where a Palm Beach County crew installed products without a Miami-Dade NOA. The permit inspector catches it, and the owner is left with an uninsurable roof until it is corrected.
- Flat built-up roof failures on 1950s and 1960s CBS ranch homes. Many of Pompano Beach’s original homes still carry low-slope built-up roofs that predate modern code. When they leak, the repair often triggers a larger compliance question.
- Wind-lifted perimeter edges and ridge vents. Pompano Beach’s exposure to Atlantic wind means the outer few feet of the roof takes the most abuse. We check perimeter fastening on every repair call, not just when the customer asks.
Pricing for Roof Repair in Pompano Beach, FL
Most residential roof repairs in Pompano Beach land between $350 and $2,800 depending on what failed and how much the code requires once we open it up. A simple vent boot replacement runs $175 to $350. A localized shingle or tile repair on a sloped roof is $450 to $1,200. Flashing and valley repairs typically run $600 to $1,600. If the repair crosses the 25% re-roof trigger, the number changes significantly because Broward County requires a full HVHZ-compliant re-roof, not a patch. You will see the number in writing before anything starts, and that price will not be negotiated away later. Call (424) 766-4937 to schedule a free estimate.
We Also Serve Cities Near Pompano Beach
Our Roof Repair team works throughout Pompano Beach and nearby communities including Coconut Creek, Margate, Deerfield Beach, and Fort Lauderdale. If you are in one of those areas and need a roof looked at, we can schedule a visit. For more on our local work, see Roof Repair in Pompano Beach.
Serving Pompano Beach, FL - Our Local Coverage Area
We’re based in the Pompano Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roof Repair in Pompano Beach
Pompano Beach is in Broward County’s High-Velocity Hurricane Zone, so every roofing product used must carry a Miami-Dade NOA, and the installation has to meet HVHZ fastening and underlayment protocols that Palm Beach County does not require. NOA-approved materials and the enhanced labor it takes to install them correctly are the main cost difference. Call (424) 766-4937 for a written price on your specific repair.
Possibly. Florida’s re-roofing trigger rule says that if more than 25% of the roof is replaced within a 12-month period, the entire roof must be brought into full HVHZ compliance. On a 1960s home with an older built-up roof, a modest storm patch can legally trigger a full tear-off, re-deck, and NOA-compliant reinstall. We identify the percentage during our inspection and walk you through what the code requires before you commit.
Salt-laden onshore winds east of Federal Highway and along the Intracoastal corrode standard galvanized flashing and fasteners within a few seasons. Stainless or hot-dipped galvanized hardware lasts far longer in that environment, which means the repair does not re-leak at the same penetrations. It is standard practice on our Pompano Beach jobs.
Look at the materials named, not just the bottom number. A compliant quote will spell out which NOA-approved products are going on, what fastening schedule is being used, what flashing hardware is specified, and which permits and inspections are included. A cheap quote that skips those details will cost more later, often at the permit inspection or the insurance claim. Ask for both quotes in writing, itemized. We provide ours in writing before any work begins.
Yes, and in Pompano Beach it is not optional. The shingle must carry a current Miami-Dade NOA, and the installation must follow HVHZ protocols for fastening and underlayment. A shingle that meets Florida Building Code elsewhere does not automatically pass in Broward County. We verify the NOA status of every product we put on a Pompano Beach roof. Call (424) 766-4937 for a free estimate.
Contact Birchbark Roofing for Roof Repair in Pompano Beach
We were called to a 1962 CBS ranch off NE 26th Avenue near Pompano Beach Highlands after a storm tore loose a section of built-up flat roof over the carport, and water was tracking under the existing decking. Because our tear-off pushed past 25% within 12 months, the whole roof had to come into HVHZ compliance: new plywood decking on an enhanced fastening schedule, NOA-approved underlayment, stainless flashing at every penetration, and a ridge vent replaced in hot-dipped galvanized. We walked the owner through the permit and inspection sequence step by step so their adjuster could see documented compliance when the claim was filed. That is how we work in Pompano Beach.
Birchbark Roofing is part of the Cedarwell family of independent local roofing businesses, and every job we do carries the Cedarwell Care Promise: Clean up like it is our own home, Ask before we move or touch anything, Respect your time and quiet hours, and Explain the price before the work. If you have kids and a dog, we coordinate the door schedule so the dog stays inside and everyone stays safe. We use pet-safe products where there is a choice. And the name? Birch bark was one of the first roofing materials: light, tough, and made to shed water.
If your roof needs attention, call (424) 766-4937 to schedule a free estimate. A live person answers, and you will get a written price before any work begins.
Written by Erik Lindgren, Owner at Birchbark Roofing, serving Pompano Beach with HVHZ-compliant roof repair and the 365-Day Done Right Promise.






Before
After
Before
After
Before
After