Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Repair Across Pacific Palisades
Roof repair in Pacific Palisades costs between $450 and $2,800 for most residential work, with full leak repairs on complex canyon lots running higher. We respond to calls across Pacific Palisades within hours, not days, and the same crew that inspects your roof is the one that fixes it. After the Palisades Fire, this community has rebuilt faster than any coastal corridor in Los Angeles, and we’ve been on those job sites since the first permits cleared. Whether you’re in the Alphabet Streets, the Huntington Palisades, or up a winding road off Sunset, call (424) 766-4937 and a live person answers, 24 hours a day.
Why Birchbark Roofing Is Pacific Palisades’s Preferred Roof Repair Company
Erik Lindgren, our owner, built Birchbark Roofing around a calm, careful approach to roofing work, and that’s what Pacific Palisades homeowners tell us they notice most. We show up with shoe covers at the door, drop cloths through the hallway, and a written price in dollars before anyone touches a shingle. Pacific Palisades families have kids, dogs, and enough going on without worrying what a roofing crew left behind. So we send you a photo of the completed clean-up before the crew pulls away.
Our Roof Repair team works on every type of roof in this community: pre-fire Spanish Colonials with clay tile, rebuilt moderns with Class A concrete tile, fire-rated metal on canyon-view estates. We know the recovery-track permitting process because we work inside it weekly, not occasionally. When a Palisades inspector asks for underlayment ratings or vent labeling, we already have the documentation ready. That’s the difference between a repair that closes in days and one that stalls for weeks.
We’re part of the Cedarwell family of independent roofing companies, holding every Pacific Palisades job to the Cedarwell Care Promise and our 365-Day Done Right Promise. If the work isn’t right, we make it right. That’s in writing, on every job.
Commercial Roof Repair in Pacific Palisades
Commercial Roof Repair in Pacific Palisades means working on flat and low-slope roofs on the commercial strips along Sunset Boulevard, the Palisades Village retail core, and the smaller office and condo buildings scattered through the community. These roofs take different abuse than residential pitched roofs: ponding water after winter storms, membrane punctures from rooftop equipment, and seams that open up in the marine layer’s persistent moisture. Most commercial repairs in Pacific Palisades run between $900 and $5,500 depending on membrane type and the scale of the damaged area.
Flat Roof Patch and Membrane Work
We commonly patch TPO, modified bitumen, and older built-up roofs on Palisades commercial buildings. A failed seam near a rooftop HVAC unit on a Sunset Boulevard storefront needs a different repair approach than a puncture on a condo building’s low-slope section. We identify the membrane type, match it, and document the repair for property management.
Drainage and Parapet Repairs
Commercial buildings in Pacific Palisades deal with concentrated water flow off parapet walls and around scuppers. When sealant fails or flashing pulls away from a parapet, water gets behind the membrane and spreads. We repair the flashing, clear the drainage path, and test the area before we call it done.
Roof Leak Repair in Pacific Palisades
Roof Leak Repair in Pacific Palisades usually starts with a homeowner noticing a stain on a ceiling after the first real rain of the season. By then, water has often traveled along a rafter or truss from the actual entry point. In this community, the most common leak sources are salt-air-corroded flashings around chimneys and skylights, deteriorated valley metal, and cracked vent boots on older roofs. A targeted leak repair in Pacific Palisades typically runs $450 to $1,400, and we always find the actual entry point before we quote a fix.
Valley Repair and Flashing Replacement
Valleys channel more water than any part of your roof, and in Pacific Palisades they also catch wind-driven rain during Santa Ana-adjacent storm cycles. When valley metal corrodes or shingles in the valley crack, water gets underneath into the decking. We tear out the damaged section, replace the underlayment, and install new flashing rated for coastal exposure.
Vent Boot and Skylight Sealing
Rubber vent boots dry out and crack, especially with salt air accelerating the aging. Skylight flashing pulls loose as sealant fails. These are smaller repairs, often completed in a single visit, but they’re the difference between a dry ceiling and a slow leak that rots decking over two winters.
Trusted Brands We Service in Pacific Palisades
Birchbark Roofing works with materials from GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. For Pacific Palisades rebuilds and repairs, we typically recommend GAF fire-rated shingles for standard pitched roofs and Atlas or Boral Class A assemblies where the recovery-track inspector requires full documentation. We keep common flashing sizes, vent components, and underlayment rolls in our Los Angeles-area supply so a Palisades repair doesn’t wait on a special order when it doesn’t have to. Whatever brand is already on your roof, we match it or upgrade it to meet current VHFHSZ code.
Common Roof Repair Problems We See in Pacific Palisades Homes
- Ember intrusion through unprotected vents. Santa Ana winds push embers into soffit and ridge vents that were never fitted with ember-resistant mesh. We see this on pre-fire homes throughout the Alphabet Streets and Marquez Knolls, where original vents are still in place. The embers sit in the attic, and the first heavy rain turns them into a roof leak with a fire-safety backstory.
- Salt-air corrosion of flashings and fasteners. The marine layer that rolls through Pacific Palisades accelerates metal corrosion. Chimney flashing, pipe collars, and exposed fasteners on homes near the bluffs fail years earlier than identical materials in inland neighborhoods.
- Failed valleys on older ranch homes. The 1940s through 1970s ranch homes off Chautauqua and Sunset often have original skip-sheathing decking under the roof. When a valley leaks, the decking below has usually delaminated too, which means the repair goes deeper than a shingle swap.
- Incomplete rebuild-era work. Some fire rebuilds were pushed through under pressure, and we find missing eave blocking, unlabeled underlayment, and vent installations that don’t match the documented assembly. These pass a quick visual check but fail the recovery-track inspection holds.
Pricing for Roof Repair in Pacific Palisades, CA
Here’s what Pacific Palisades homeowners should expect, in honest dollar terms. A simple vent boot replacement runs $250 to $450. A valley repair runs $700 to $1,500. Flashing replacement around a chimney runs $600 to $1,200. A full leak diagnosis and targeted repair lands between $450 and $1,400. Flat roof patches on commercial buildings start around $900. These numbers reflect Palisades labor rates and the fire-rated materials the recovery track often requires.
Steep canyon lots, difficult access, and multi-story heights push toward the higher end. You’ll see your exact number in writing before we start, never after. Call (424) 766-4937 for a free estimate.
We Also Serve Cities Near Pacific Palisades
Birchbark Roofing serves Pacific Palisades and the surrounding coastal communities, including Santa Monica, Venice, Topanga, and Marina del Rey. Each has its own permitting quirks, but none shares the recovery-track documentation requirements unique to the Palisades rebuild zone. If you’re nearby, the same careful crew and written-price promise apply.
Serving Pacific Palisades, CA - Our Local Coverage Area
We’re based in the Pacific Palisades area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roof Repair in Pacific Palisades
Pacific Palisades sits inside California’s Very High Fire Hazard Severity Zone, which means any roof repair touching the assembly, underlayment, or venting must use Class A fire-rated materials. After the January 2025 Palisades Fire, the city enforces this strictly, and the recovery-track permitting process documents every component. Call (424) 766-4937 and we’ll explain what your specific repair triggers.
The Palisades recovery permitting track is LA City’s dedicated process for post-fire rebuilds and repairs, with inspection holds for fire-resistive roof assembly documentation: underlayment ratings, vent labeling, and eave blocking. A repair that would take two days with a standard LA permit can take an extra week if the paperwork isn’t ready. Our Roof Repair team prepares the documentation alongside the work, so the inspector has everything before the first hold.
Salt air from the marine layer accelerates corrosion on metal flashings, fasteners, and drip edges, especially on homes within a mile of the bluffs. That’s why Pacific Palisades repairs often reveal more rot under a small leak than expected. We use coastal-rated metals and document the condition we find, so you know exactly what was replaced and why.
Yes, we repair roofs on steep canyon and bluff lots throughout Pacific Palisades, including the hillside streets off Chautauqua, Bienveneda, and Palisades Drive. These jobs take specialized staging and rigging, and the price reflects the access challenge. We’ll walk you through the specific approach before we quote it.
Yes, we respond to active roof leaks in Pacific Palisades, and a live person answers the phone 24 hours a day, 7 days a week. We’ll prioritize stopping the water from getting into your home, then schedule the full repair with a written price. Call (424) 766-4937, day or night.
Written by Erik Lindgren, Owner at Birchbark Roofing, serving Pacific Palisades and the surrounding coastal communities.






Before
After
Before
After
Before
After